Nfc Board - Sony HT-MT500 Service Manual

HT-MT500/MT501
2-7.

NFC BOARD

Note 1: When the NFC board is replaced, refer to "NFC CONNEC-
TION CHECKING METHOD" on page 6.
4 Gradually peel off the NFC board with
a flathead screwdriver, etc.
Note 3: The NFC board is affixed to the top
panel with a strong adhesive sheet.
When removing the NFC board, take
care so that you do not damage it.
flathead screwdriver, etc.
NFC board
left side
5 Draw the NFC board
block out of the guide
in top panel block.
guide
NFC board
rear side
guide
CN001
14
top panel
top side
The opposite side
guide is terminal side.
FFC 6P
guide
guide line
NFC board
7 NFC board
2 filament tape
(sub material)
6 double adhesive tape
3 FFC 6P
(CN001)
guide
guide
top panel assy block
guide line
packing (VG2-2)
(55 35)
TOUCH board
rear side
guide line
(center)
1 packing (VG2-2)
(55 35)
Note 2: Lay a soft piece of cloth under the unit
to avoid damaging the top panel.
right side
filament tape
(sub material)
FFC 6P