Loudspeaker (Top L-Ch) - Sony HT-ST5000 Service Manual

2-26. LOUDSPEAKER (TOP L-CH)

6 speaker block
Note 1: When installing the speaker block,
push the speaker connection cable
into the baffle block.
terminal
(wide)
[gray]
left side
groove
groove
5 Lift up the speaker
block in the direction
of the arrow.
7 terminal
boss
rear side
left side
boss
terminal
(narrow)
[black]
speaker
connection
cable
baffle
block
4 two screws
(BVTP3.5)
(wide)
[gray]
hole
7 terminal
baffle block
front side
Note 4: When connecting the terminals of the speaker
connection cable to the loudspeaker, check the
direction of the terminals before installing.
OK NG
1 four screws
(BVTP3
front side
left side
hole
4 two screws
(BVTP3.5)
8 loudspeaker (top L-ch)
Note 2: When installing the loudspeaker (top L-ch),
check the position of the terminals and align
the two bosses and two holes.
(narrow)
[black]
terminal
(wide) [gray]
left side
speaker connection cable
HT-ST5000
8)
bottom side
3 top (L-ch) speaker block
2 enable (L) block
rear side
Note 3: Lay a soft piece of cloth
under the unit to avoid
damaging the grille assy.
loudspeaker (top L-ch)
terminal
OK
(narrow)
[black]
NG
35