Sony HT-MT501 Startup Manual

4-687-808-33(1)
Sound Bar
Startup Guide
HT-MT500/MT501
Refer to the Operating Instructions
(separate document) for what you
can do with the system and the
network settings.
1
Deciding the installation position
Subwoofer
Note
• Do not place magnetic cards on the system or near the system.
• Do not place metal objects other than a TV around the system. Wireless functions may become unstable.
What's in the box
Bar Speaker (1) Subwoofer (1)
R03 (size AAA) battery (2) Optical digital cable (1)
AC power cord (mains lead) (1) AC power cord (mains lead) for
the subwoofer (1)
Operating Instructions Startup Guide (this document)
About the operation method of the system
Connect this system and the TV with the HDMI cable (not supplied) to display the operation screen
of the system on the TV. Prepare the HDMI cable.
To install the subwoofer horizontally
Bar Speaker
Speaker pad (supplied)
2
Connecting with a TV
Remote control (1)
AC adapter (1)
Speaker pad for the subwoofer
(4)
Video signal
Tip
• When your TV does not have both an OPTICAL OUT jack and an HDMI IN jack, refer to "Connecting a TV or Portable Audio Device via the ANALOG IN Jack" in the Operating Instructions (separate document) for a connection
method.
Note
• Make sure that the cables are firmly inserted.
3
Setting up the remote control
Is the HDMI IN jack on your TV labeled "ARC" ?
YES
Blu-ray Disc™ player,
cable box or satellite
box, etc.
Video signal
Audio signal
HDMI cable (not supplied)
NO
Blu-ray Disc player,
cable box or satellite
box, etc.
Audio signal
HDMI cable Optical digital cable (supplied)
(not supplied)
Continued on back page
© 2017 Sony Corporation Printed in Malaysia