HT-MT300/MT301
2-8.
NFC BOARD
Note 1: When the NFC board is replaced, refer to "NFC CONNEC-
TION CHECKING METHOD" on page 4.
LED_CHUKEI board
long
rear side
FFC 6P
4 double
adhesive
tape
left side
top cabinet block
1 FFC 6P
(CN001)
14
The opposite side
is terminal side.
short
CN001
NFC board
5 NFC board
3 Draw the NFC board
block out of the rib in
top cabinet block.
rib
front side
top side
2 Gradually peel off the NFC board with
a flathead screwdriver, etc.
Note 3: The NFC board is affixed to the top
cabinet with a strong adhesive sheet.
When removing the NFC board, take
care so that you do not damage it.
flathead screwdriver, etc.
Note 2: Lay a soft piece of cloth under the unit
to avoid damaging the top cabinet.
right side
NFC board
top cabinet