Switching To Bluetooth Mode; Pairing An External Device - Nordmende Transita 30 User Manual

9 Bluetooth
In Bluetooth mode, you can enjoy music from a connected smartphone or tablet via the Transita
30's speakers. For this purpose, the two devices must first be "paired" to each other.

9.1 Switching to Bluetooth mode

Change to Bluetooth mode by pressing the MODE button.
>
> [Bluetooth] is shown on the display.
When switching on for the first time, an external device (smartphone/tablet) must first be
paired with the device.
If an external device has already been paired and is in range, a connection is generated
automatically. Depending on the connected device, music playback may start automatically.

9.2 Pairing an external device

To pair an external device, for example a smartphone or tablet, with the Transita 30, follow these
steps:
> Start Bluetooth mode as described in Section 9.1.
Page 96
The display will show [Bluetooth] and [Pairing mode...].
>
> Now start searching for nearby Bluetooth devices on your external device. You may need to
enable the Bluetooth feature on your external device first.
You can find out how to activate the Bluetooth function and carry out a search on your
external device by consulting the instruction manual for your external device.
The two devices should be within 10 cm of each other during the pairing process.
The entry Transita 30 should now appear in the list of Bluetooth devices found on your
>
external device. Tap on the name of the radio to complete the pairing process. If the pairing
process is successful, a confirmation tone sounds from the speaker on the Transita 30, and
the display shows [Connected].
If the pairing process stops, or if "Pairing mode" is not displayed, hold down the Scan button
until "Pairing mode" appears on the display. This method can also be used to unpair a
paired device.
Depending on the Bluetooth protocol of your external device, you may be able control the
music playback using the Tune/Select knob on the Transita 30. Turn the knob to the right
to skip to the next track. Turn it to the left to play the current track again or to skip to the
previous track. Press the Scan button to pause/play the playback.
DE
EN
Page 97