Sleep Timer; System Settings; Cancelling Pairing; Alarm - Nordmende Transita 30 User Manual

Alternatively, you can use the playback controls in the music app on your external device.

9.3 Cancelling pairing

Hold down the Scan button to cancel an active pairing. Note that the device to be unpaired must be
connected to the Transita30 if you want to unpair it. You can then pair a new device as described in
Section 9.2.

10 Sleep Timer

The Sleep Timer automatically switches the Transita 30 to Standby (mains operation) or Off
(battery power) after the set time.
> Press the Volume/Snooze/Sleep knob (8) to select a time period after which the Transita 30
should switch off. You can choose between Off, 10, 15, 30, 45 and 60 minutes.
> The Sleep Timer will be activated immediately. An "S" appears in the top right-hand corner
of the display with the remaining time until it is switched off.
If you want to deactivate an active Sleep Timer, press the Volume/Snooze/Sleep knob
repeatedly until [Off]appears on the display.
Page 98

11 System settings

All the settings referred to in this section apply equally to DAB+, as well as to FM and Bluetooth
mode.
Proceed as follows to retrieve the System sub-menu:
> Open the menu by holding down the Menu/Info button and use the Tune/Select knob to
select the [System] menu item. Press the Tune/Selectknob to confirm.
All the functions explained below assume that the System sub-menu has already been
opened.

11.1 Alarm

The Transita 30 has 2 alarms.
The alarm function is only available in mains operation.
Open the [System] sub-menu as described in Section 11.
>
> Use the Tune/Select knob to select the [Alarm] menu item. Press the Tune/Selectknob to
confirm.
DE
EN
Page 99