Overwriting/Deleting A Station Memory Slot; Signal Strength; Manual Setting - Nordmende Transita 30 User Manual

7.7 Overwriting/deleting a station memory slot

> Simply save a new station in a Favourites memory slot as described.
When retrieving the factory settings all memory slots are deleted.

7.8 Signal strength

> Briefly press the Menu/Info button repeatedly until the signal strength bar is displayed.
Stations with a signal strength below the required minimum signal intensity (mark) are not
transmitting a strong enough signal. Align the telescopic antenna as described in Section
5.3.2 if required.
Page 88

7.9 Manual setting

This menu item is used to check the reception channels and can be used to align the antenna. This
saves new stations to the station list.
> Open the menu by holding down the Menu/Info button and use the Tune/Select knob to
select the [Manual setting] menu item. Press the Tune/Selectknob to confirm.
> Select a channel (5A to 13F) using the Tune/Select knob. Its signal intensity will now be
shown on the display. If a DAB+ station is being received on a channel, the station ensemble
name is displayed. The antenna can now be aligned to the maximum signal intensity.
Stations with a signal strength below the required minimum signal intensity (mark) are not
transmitting a strong enough signal. Align the telescopic antenna as described in Section
5.3.2 if required.
DE
EN
Page 89