Table of Contents
Advertisement
Available languages
Available languages
6 Menu navigation
You can access all of the Transita 30 functions and settings via the menu.
Menu navigation is carried out using the Menu/Info (6) and the Tune/Select knob (3).
The menu is divided into submenus and, depending on the mode type, contains different menu
items or functions that can be enabled. To open the menu, simply hold down the Menu/Info
button briefly. To move to submenus, first press the Tune/Select knob to display a submenu and
then press the Tune/Select knob to retrieve the submenu. An asterisk (*) highlights the current
selection.
Closing a menu: Push the Menu/Info button several times (depending on which submenu
you are in) until the current radio channel is displayed again.
Settings are not saved until the Tune/Select knob has been pressed. If the Menu/Info
button is pressed instead of this, the settings are not accepted or saved (theMenu/Info
button in this case acts as a "Back" button).
The functions and buttons to be pressed are shown in bold in this instruction manual.
Displays in [square brackets].
Some text (e.g. menu items, station information) may be too long to show on the display.
These will be then shown as running text shortly thereafter.
Page 84
7 DAB+ (digital radio) function
7.1 What is DAB+?
DAB+ is a new digital format through which crystal clear sound with no noise can be heard. In
contrast to conventional analogue radio stations, DAB+ can be used to broadcast multiple stations
on one and the same frequency. This is referred to as an ensemble or multiplex. An ensemble
consists of the radio station as well as a number of service component or data services. For further
information, please visit
www.dabplus.de
or www.dabplus.ch.
7.2 DAB+ (digital radio) reception
>
Press the Mode (5) button until [DAB] is shown on the display.
If DAB+ is being started for the first time, a full station scan is performed. After the scan is
complete, the first station is played back in alphanumeric order.
7.3 Performing a full scan
The automatic scan Full Scan scans all DAB+ Band III stations and thereby finds all stations
being broadcast within the reception range.
DE
EN
Page 85
Advertisement
Table of Contents
