Fm Reception With Rds Information; Automatic Station Scan; Manual Station Scan; Scan Settings - Nordmende Transita 30 User Manual

8.2 FM reception with RDS information

RDS is a procedure for broadcasting additional information via FM stations. Broadcasters with RDS
broadcast their station name or the programme type, for example. This is shown on the display. The
device can show the RDS information RT (Radio text), PS (Station name), PTY (Channel type).

8.3 Automatic station scan

> Press the Scan button (10) to automatically search for the next station with sufficient signal
intensity.
If a FM station with sufficient signal strength is found, the scan stops and the station is
played. If an RDS station is being received, the station name appears and, possibly, the
radio text.
Please use the manual station scan for setting weaker stations.
Page 92

8.4 Manual station scan

> Turn the Tune/Select knob to set the station or frequency you want.
The display shows the frequency in increments of 0.05 MHz.

8.5 Scan settings

In this menu item it is possible to set the sensitivity of the scan.
Open the menu by holding down the Menu/Info button and use the Tune/Select knob to
>
select the [Scan settings] menu item. Press the Tune/Selectknob to confirm.
Select whether the scan should only stop for stations with a strong signal [Strong Stations
>
Only] or for all stations (including stations with a weak signal) [All Stations].
With the All Stations setting, the scan stops automatically upon detecting each available
station. This can result in weak stations being played with background noise. When using
for the first time, and after carrying out the factory settings, the [Strong stations only]
menu item is preset.
DE
EN
Page 93