Table of Contents
Advertisement
SYSTEM MENU
The System menu allows the user to set the Compact
Turbimeter preferences and review results and
calibration data.
Log
Select 'Results' or 'Calibrations'.
Once the log has been chosen, select 'View' or 'Clear'.
The 'Readings' log holds up to 100 data points with
date, time, Sample ID, Operator ID, Reading Mode and
Result. The oldest result will automatically be
overwritten when the log is full.
The 'Calibrations' log stores the date, time, method and
Operator ID (if set) for the last 12 good calibrations.
To view data select 'View' and use the up/down
buttons to scroll in either direction.
Use 'Clear' in either log to delete the entire log. Select
'Clear' then 'Yes' in the following screen to delete.
Operator ID
Optionally select or edit the username using
alphanumeric characters.
To create a new Operator ID select a blank line and
press 'OK'
Press 'New' to create the ID.
Use the Up/Down buttons to show/change characters.
9
Advertisement
Table of Contents
