Sample Id - palintest CT12 Manual

When the correct character is shown, press and hold
the [+] key for one second to move to the next character.
Correct mistakes by holding the [Del] key for one second.
Complete the process by pressing 'Done' briefly.
Select 'OK' to accept the entry or Edit to modify the
entry.
To modify or delete an existing Operator ID, highlight
the ID and select 'Edit' Choose either 'Edit' to modify
the existing entry or 'Delete' to remove it from the list.
Deleting the Operator ID will not affect results stored in
the log.
Up to 12 Operator IDs can be stored and recalled from
memory as required.
To return to the System menu, either select the
Operator ID required using 'OK' or highlight a blank
entry (if one is available) and press 'Back'

Sample ID

Optionally set the Sample ID using the same method
as Operator ID.
Up to 24 Sample IDs can be stored and recalled as
required.
Both Operator ID and Sample ID are stored in the log
with result and calibration data.
10