Highlight 'Intercept' and press 'OK' (in many cases the
intercept will be zero but for straight line fitting an offset
will sometimes be required).
Use the Up/Down buttons to enter the intercept.
Select 'Add' to recall data points from memory for
which a correlated suspended solids value has been
measured.
To edit factors highlight the slope or intercept and
press 'OK'
Use Up/Down buttons to adjust the value.
Press 'Back' to return to 'Calibration' menu.
Restore Factory Calibration
To restore the default calibration, select this option and
press 'OK'.
Choose to continue – 'Yes'/'No'
The screen will show 'Successful'.
23