Battery Life/Replacement - palintest CT12 Manual

Battery Life/Replacement

Your Compact Turbimeter is supplied with fresh batteries
that will be suitable for at least 150 hours of use.
Changing
compartment on the rear of the instrument. Two 'AA'
1.5V batteries are required. Current battery status is
displayed on the screen to assist in power management.
The Turbimeter has an auto-off function to save power,
automatically switching off the meter after five minutes
of inactivity.
A back-up battery is located on the PCB to store all
user data including the last mode used for reading.
Replacing the AA batteries will not lead to settings or
calibration data being lost.
If battery power is insufficient for effective analysis the
Turbimeter screen will show Error 110: Battery Low
and advise to change batteries. The battery icon will
also show 'Empty' status.
If battery power is insufficient for any operation the
Turbimeter screen will show Error 111: Battery
Critical and automatically shut down.
batteries is carried out through the
8