Start-Up - palintest CT12 Manual

START-UP AND START PAGE
To switch the unit on, press the POWER button and
release. An audible beep will confirm the instrument is
on. Switch off by holding the POWER button for 1
second.
The LCD screen is provided with a backlight option that
can be set to on/off in the 'System' menu (see Page 9).
The initial default setting is ON.
After initialization the Start page will appear and
display, initially defaulted to Mode screen and showing
three options:-
1 Reading – Select the mode to measure turbidity or
suspended solids (see Page 12).
2 Calibration – Choose either SDVB, Total Suspended
Solids or to Restore the factory calibration values (see
Page 16).
3 System – view or set Log (result and calibration),
Operator ID, Sample ID, Units, Language, Set
Time, Set Date, Date Format, Software Version and
switch the backlight on/off (see Page 9).
The option to change the Start page is available in the
'System' menu, allowing the user to choose to start in
the default mode above, normal measurement mode
or the last measurement mode used.
Navigation through Menus is carried out using the
Up/Down buttons, using the OK button to select or the
Back to return up a level.
6