8010 Chassis - Avaya 8800 Installation Manual

Chassis installation fundamentals
The 8010co chassis supports the following DC power supplies:
• 8004DC
• 8005DC
• 8005DI DC
If your Ethernet Routing Switch 8800/8600 is operating in a redundant power configuration,
you can upgrade the Ethernet Routing Switch 8800/8600 for additional power while the
Ethernet Routing Switch 8800/8600 remains in operation.
Caution:
The output power ratings differ between power supply models. Avaya recommends that you
do not operate the Ethernet Routing Switch 8800/8600 chassis with dissimilar power supply
models with different output power ratings for an extended period of time.
Upgrade the power supplies before you upgrade the modules.
For information about power supply installation, see Avaya Ethernet Routing Switch 8800/8600
Installation — AC Power Supply, NN46205-306 and Avaya Ethernet Routing Switch 8800/8600
Installation — DC Power Supply, NN46205-307.
The 8010co chassis uses two fan trays for cooling. For information about fan trays, see Avaya
Ethernet Routing Switch 8800/8600 Routine Maintenance, NN46205-312.

8010 chassis

The 8010 chassis has eight slots for interface modules and two slots for the 8692 SF/CPU or
8895 SF/CPU modules. For more information, see
page 27. Slots are numbered from the top down. You can install Avaya Ethernet Routing
Switch 8800/8600 interface modules in slots 1 through 4 and in slots 7 through 10. Slots 5 and
6 are reserved for Ethernet Routing Switch 8800/8600 SF/CPU modules. For information about
module installation, see Avaya Ethernet Routing Switch 8800/8600 Installation — Modules,
NN46205-304.
26 Installation — Chassis
Comments? infodev@avaya.com
Figure 2: 8010 chassis and components on
November 2012