8006 Chassis - Avaya 8800 Installation Manual

Chassis installation fundamentals
If your Avaya Ethernet Routing Switch 8800/8600 is operating in a redundant power
configuration, you can upgrade the Avaya Ethernet Routing Switch 8800/8600 for additional
power while the Ethernet Routing Switch 8800/8600 remains in operation.
Caution:
The output power ratings differ between power supply models. Avaya recommends that you
do not operate the Ethernet Routing Switch 8800/8600 chassis with dissimilar power supply
models with different output power ratings for an extended period of time.
Upgrade the power supplies before you upgrade the modules.
For information about power supply installation, see Avaya Ethernet Routing Switch 8800/8600
Installation — AC Power Supply, NN46205-306 or Avaya Ethernet Routing Switch 8800/8600
Installation — DC Power Supply, NN46205-307.
The 8010 chassis uses two fan trays for cooling. For information about fan trays, see Avaya
Ethernet Routing Switch 8800/8600 Routine Maintenance, NN46205-312.

8006 chassis

The 8006 chassis provides four slots for interface modules and two slots for 8692 SF/CPU with
Super Mezz or 8895 SF/CPU modules. For more information, see
components
modules. Slots 5 and 6 are reserved for Ethernet Routing Switch 8800/8600 SF/CPU modules.
For information about module installation, see Avaya Ethernet Routing Switch 8800/8600
Installation — Modules, NN46205-304.
28 Installation — Chassis
on page 29. The top four slots are for the installation of 8800/8600 interface
Comments? infodev@avaya.com
Figure 3: 8006 chassis and
November 2012