Introduction; General - Kemppi MasterTig ACDC 3500W Operating Manual

1.

INTRODUCTION

1.1 General

Congratulations on choosing MasterTig ACDC 3500W
welding equipment. Used correctly, Kemppi products can
significantly increase the productivity of your welding
and provide years of economical service.
This operating manual contains important information
on the use, maintenance and safety of your Kemppi
product. The technical specifications of the equipment
can be found at the end of the manual.
Please read the operating manual and the safety
instructions booklet carefully before using the equipment
for the first time. For your own safety and that of your
working environment, pay particular attention to the
safety instructions in the manual.
For more information on Kemppi products, contact
Kemppi Oy, consult an authorized Kemppi dealer, or visit
the Kemppi website at www.kemppi.com.
The specifications presented in this manual are subject to
change without prior notice.
Important notes
Items in the manual that require particular attention in
order to minimise damage and harm are indicated with
below symbols. Read these sections carefully and follow
their instructions.
Note: Gives the user a useful piece of information.
Caution: Describes a situation that may result in
damage to the equipment or system.
Warning: Describes a potentially dangerous situation.
If not avoided, it will result in personal damage or fatal
injury.
Disclaimer
While every effort has been made to ensure that the
information contained in this guide is accurate and
complete, no liability can be accepted for any errors
or omissions. Kemppi reserves the right to change the
specification of the product described at any time without
prior notice. Do not copy, record, reproduce or transmit
the contents of this guide without prior permission from
Kemppi.
© Kemppi Oy 2021
3
MasterTig ACDC 3500W R01