Lightspeed Flexcat Daily Operation Instructions
Hide thumbs
Also See for Flexcat:
- User manual (46 pages) ,
- Troubleshooting manual (2 pages) ,
- Registration manual (9 pages)
Advertisement
DAILY OPERATION INSTRUCTIONS
1.
Remove the pods from the charger and place them on the group tables.
•
The speakers will stay powered on while charging when the switch is left in the on position.
•
Note the location of the pod numbers.
2.
Remove the microphone from the charger and put on.
•
The microphone will default to the Mute position, the
teacher status will turn to red.
•
Place the microphone around your neck and insert the
earbud.
•
Press the power/mute button, the teacher status will
turn blue, indicating the microphone is active.
3.
Remove the remote and begin instruction. Use the
remote to:
•
Address the whole class
•
Instruct small groups
•
Redirect small groups
•
Monitor (listen only) small groups
•
Activate student group sharing
•
Adjust earbud volume
Power /
Mute
1
4
2
3
5
6
UP
DN
Mute
Vol
Vol
Advertisement
Table of Contents
Related Manuals for Lightspeed Flexcat
Summary of Contents for Lightspeed Flexcat
- Page 1 DAILY OPERATION INSTRUCTIONS Remove the pods from the charger and place them on the group tables. • The speakers will stay powered on while charging when the switch is left in the on position. • Note the location of the pod numbers. Power / Mute Remove the microphone from the charger and put on.
- Page 2 DAILY OPERATION Using the remote: Function Command Description Whole Class Press center Activates Redcat Access speaker to distribute teachers voice Instruction button to the entire class. Pod Selection Press #1-6 Connect to each individual student group pod. The pod # button will light and a tone will sound in the earbud when connected (1-2 seconds).
Need help?
Do you have a question about the Flexcat and is the answer not in the manual?
Questions and answers