Right Handlebar - Suzuki Burgman Series Owner's Manual

RIGHT HANDLEBAR

SCREEN
ENGINE STOP SWITCH 1

" " position
The ignition circuit is off. The
engine cannot start or run.

" " position
The ignition circuit is on and the
engine can run.
HAZARD WARNING SWITCH

" 2
"
All four turn signal lights and indi-
cators will flash simultaneously
when the switch is turned on with
the ignition switch in the "ON" or
"P" position. Use the hazard
warning lights to warn other traffic
during emergency parking or
when your vehicle could other-
wise become a traffic hazard.
FRONT BRAKE LEVER 3
The brake is applied by squeezing
the front brake
towards the grip. The brake light
will be lit when the lever is
squeezed inward.
lever gently
3-25
Front Brake Lever Adjustment
The distance between the throttle
grip and the front brake lever is
adjustable to 5 positions. To
change the position, push the
brake lever forward and turn the
adjuster to the desired position.
When changing the brake lever
position, always be sure the
adjuster stops in the proper posi-
tion; a projection of the brake
lever pivot should fit into the
depression of the adjuster. This
motorcycle is delivered from the
factory with its adjuster set on
position 3.
 WARNING
Adjusting the front brake lever
position while riding can be
hazardous. Removing a hand
from the
reduce your ability to control
the motorcycle.
Never adjust the front brake
lever position while riding.
Keep both hands on the han-
dlebars.
handlebars can