CLOCK A
Press and hold the SELECT F
and ADJUST G buttons simulta-
neously for 2 seconds until the
clock display blinks when adjust-
ing clock. Push the SELECT but-
ton F to adjust the hour display.
Push the ADJUST button G to
adjust the minute display. Press
and hold the SELECT F and
G
ADJUST
neously for 2 seconds to return to
the clock mode.
NOTE:
•
When the button is pressed
and held, display will increase
continuously.
•
The clock can be adjusted
when the ignition switch is in
the "ON" position.
•
This clock is powered by the
battery of the motorcycle. If
your motorcycle is to be left
unused more than two months,
remove the battery from the
motorcycle.
buttons
simulta-
DRIVE MODE INDICATOR B
Drive mode: For normal riding
and better fuel economy.
Power mode: For sport riding and
getting more power.
TACHOMETER C
The tachometer indicates the
engine speed in revolutions per
minute (r/min).
If the meter needle does not point
to zero, follow the procedure
below to reset the meter.
1. Press and hold the ADJUST
button G and turn on the igni-
tion switch.
2. Hold the ADJUST button G for
4 seconds.
3-15
Need help?
Do you have a question about the Burgman Series and is the answer not in the manual?