Tools Menu - HotSpring HOT SPOT RELAY Owner's Manual

TOOLS MENU

The TOOLS menu is one of the main menus on the control panel.
Within the TOOLS menu are seven submenus, which consists of; Temp
Lock, Spa Lock, Light, Econ or Summer Timer, Filter 1, Filter 2, LCD
and Exit.
To enter onto the TOOLS menu, scroll through the main menus using
the MODE ( or ) button until TOOLS is displayed. Press the
(+) b utton to enter into the TOOLS submenu, use the MODE ( or )
button to scroll through the submenus. Once the desired submenu is
displayed, press the (+) b utton to activate that submenu. To leave the
TOOLS submenu, scroll through the submenu using the MODE ( or
) button until EXIT is displayed, then press the (+) button to exit the
submenu.
LOCKING FEATURES
The two locking features, SPA LOCK and TEMPERATURE LOCK,
are enabled from the control panel by pressing the MODE ( or )
button until TOOLS is displayed. Then press the (+) b utton to enter the
TOOLS submenus. Use the MODE ( or ) button to scroll through
the submenus to get to the locking features. Once enabled, a lock will
remain active until the specific button combination is applied to disable
the lock. Even if power is disconnected from the spa and soon thereafter
reapplied (such as in a power outage) the lock will remain in place.
TEMPERATURE LOCK
The TEMPERATURE LOCK feature
deactivates the temperature control function
of the control panel. TEMPERATURE LOCK
is most often used by people who do not
want others to tamper with or change the set temperature of the spa water.
TEMPERATURE LOCK is a submenu of the TOOLS menu
To activate the TEMPERATURE LOCK, press the MODE ( or )
button in the TOOLS submenu until the TLOK- symbol is displayed on
the screen. Press the (+) b utton to activate the TEMPERATURE LOCK
feature (TLOK+).
When the TEMPERATURE LOCK is activated, the JETS, LIGHTS
and any other features your spa may have will operate normally, and
the temperature setting can be viewed but can NOT be changed. If a
temperature button is pressed, TLOK will display for several seconds,
then turns off.
To deactivate the TEMPERATURE LOCK, press the MODE ( or )
button in the TOOLS submenu until the TLOK+ symbol is displayed
on the screen. Press the (-) b utton to deactivate the TEMPERATURE
LOCK feature.
SPA LOCK
The SPA LOCK feature deactivates all of the
functions of the control panel. It is generally
used to prevent unwanted use of the spa. The
SPA LOCK menu is a submenu of the TOOLS
menu.
To activate the SPA LOCK, press the MODE ( or ) button in
the TOOLS submenu until SLOK- is displayed on the screen. Press the
(+) button to activate the SPA LOCK feature.
When the SPA LOCK is activated, the buttons for the jets, temperature
control, light, and any other features your spa may have are deactivated.
If Jets, Light button, or (+) or (-) button is pressed, the SLOK will display
for several seconds, then turns off.
To deactivate the SPA LOCK, press the MODE ( or ) button in
Operating Instructions
the TOOLS submenu until the SLOK+ symbol is displayed on the
screen. Press the (-) b utton to deactivate the SPA LOCK feature.
LOCK OVERRIDE
The Lock Override feature is for spa users who normally keep the
set temperature locked. Should the user wish to lock all spa controls
temporarily, the spa lock can be applied over an already-applied
temperature lock. Then, when the spa lock is removed, the temperature
lock will remain on to prevent unwanted tampering with the set
temperature.
LIGHTS - MULTI-COLOR MENU CONTROLS
Your spa lights can display a variety of different colors as well as run
through a continuous sequence of colors (loop) at different speeds. To
activate this function the following is required:
Press the MODE ( or ) button to scroll to the TOOLS screen. Once
displayed, press the (+) button to enter the TOOLS submenu. Press the
MODE ( o r ) button to scroll to LIGHT screen, press the (+) button to
enter DIM, screen. Press the (+) button or (-) button in the DIM screen to
adjust the brightness of the lights. Press the MODE () button to scroll
to Color screen. Press the (+) button or (-) button in the COLOR screen
as many times as desired to toggle through the different light colors.
Press the MODE () button to scroll to Loop screen. Press the (+)
button or (-) button in the LOOP screen to select a continuous sequence
of colors, the higher the loop number the faster the color sequence will
run. Press the MODE () button to scroll to EXIT screen. Press the (+)
button in the EXIT screen to exit the LIGHT menu.
If the lights are turned off while in the LOOP or COLOR mode, the same
mode will exist when the lights are reactivated. You will see a flashing
light icon whenever your LOOP mode and lights are turned on.
SLEEP MODE
The Sleep Mode operation is a feature that minimizes pump operation
during quiet evening hours. For example, if Filter Cycle 1 (F1) is set to
activate at 8:00 a.m., by default, Filter Cycle 2 (F2) will activate at 8:00
p.m. (12 hours later). During 8:00 p.m. to 8:00 a.m., if the spa should
call for heat, the pump and heater will activate to heat the spa under
normal temperature demand. However, when in Sleep Mode, should
the spa call for heat, the pump and heater will be suspended after Filter
Cycle 2 (F2) until the activation of Filter Cycle 1 (F1), at 8:00 a.m. to
minimize pump activation during quiet evening hours.
Important: Power-up of the spa starts the F1 sequence. In order for
the sleep mode to work in the evening hours, the spa must be powered
up in the early morning hours. The Sleep Mode will always be active
the 6-12 hours between the end of (F2) and the beginning of (F1)
depending on how the filter cycle program is set.
Note: If temperature drops below 80º F (27º C), heater will automatically
activate to prevent spa from freezing.
To activate Sleep Mode feature:
A. Press the MODE ( or ) button until
the TOOLS screen is displayed.
B. Press the (+) button to enter the TOOLS
submenus.
C. Press the MODE ( or ) button until ECON is displayed.
D. Press the (+) b utton to activate Sleep Mode. Moon & Stars icon will
appear on the screen of the control panel, indicating this feature
has been activated.
To deactivate this feature, simply repeat steps A-C then press the (-)
button.
Page 15