Table of Contents
Advertisement
Installing New Software
(cont.)
Resetting and Updating
5. The "Send File" window appears (see Figure 2-12 below). Select
the replacement software (designated by a .cod extension) from
the folder where it has been stored.
Figure 2-12: "Send File" Window
6. From the protocol drop-down menu, select "Xmodem." The
software update now begins as the "Xmodem file send" appears
(see Figure 2-13 below).
Figure 2-13: "Xmodem File Send" Window
February 2009
2-9
Advertisement
Table of Contents
