Setting Up The Pc - GE CTF878 User & Service Manual

Setting Up the PC

Resetting and Updating
1. From the Start Menu, click Programs/Accessories/Hyperterminal
to open the Hyperterminal window.
Note: If this is the first time that Hyperterminal has been launched, a
Location Information window will pop up (see Figure 2-4
below). Enter any area code, and then click OK.
Figure 2-4: Location Information Window
2. A New Connection window appears (see Figure 2-5 below). Enter
a name for the New Connection. Click OK.
Figure 2-5: New Connection Window
February 2009
2-5