Introduction; Entering The Service Menu - GE CTF878 User & Service Manual

Introduction

Entering the Service
Menu
Resetting and Updating
For user convenience, the CTF878 offers a Service Menu. This menu
enables users to perform a variety of functions that they might
occasionally require. Those covered in this chapter include:
•
return to factory default parameters
•
load updated versions of the meter program into the CTF878
To enter the Service Menu, press the
the CTF878 keypad. The Menu Bar replaces the Status Bar at the top
of the screen. Press the [ ] arrow key to scroll from the Site Menu to
the Service Menu. At the Service Menu, press
appears similar to Figure 2-1 below.
Site Program
Velocity, m/s
Units
15.38
Corr SNR
0
Figure 2-1: Service Menu
To scroll to a particular option, press the [
you reach the option. Then press
When entering parameters in an option, press:
•
the [ ] key to step through the available parameters.
•
the [ ] key to scroll back to a previously entered parameter.
• [F2]
the key (Cancel) or the
and return to Operate Mode without changing the parameters.
[MENU]
key at the lower right of
[ENTER]
Service
Meter Logging
Diagnostics
Test
Signal Setup
Error Limits
Test
Factory Defaults
Flash Update
Calibrate/Test
Test EEProm
34
50 100
] or [
[ENTER]
to open the option window.
[ESC]
key to exit an option at any time
February 2009
. The screen
] arrow keys until
2-1