Changing The Programme Sequence; Changing A Programme Once It Has Started; Cancelling The Current Programme; Reselecting A Cancelled Programme - Miele PDR 910 EL SOM Operating And Installation Instructions

Changing the programme sequence

Reselecting a
cancelled pro-
gramme
42

Changing a programme once it has started

You cannot change to another programme once a programme has
started (this prevents unintentional alterations). You will need to can-
cel the current programme before you can select a new one.
 Risk of fire due to incorrect use and operation.
The laundry can burn and destroy the tumble dryer and the sur-
roundings.
See the section on "Warning and safety" for further information.

Cancelling the current programme

Touch the Start/Stop sensor control.

The following message appears in the display:
Yes
Touch the sensor control to cancel the current programme.

 Risk of burns by touching hot laundry or the tumble dryer drum.
Touching the hot laundry or the tumble dryer drum may cause
burns.
Let the laundry cool down and remove it carefully.
Opening the door of the tumble dryer during the programme se-
quence will cancel the current programme.
Door opening status
If the
the supervisor level, the current programme will be interrupted when
the door is opened. In the case of an interruption, the tumble dryer
will remain in the current programme.
The interrupted programme will be continued when the door is
closed and the Start/Stop
Open and close the door.

Select and start a new programme.

Adding laundry during ongoing Delay start period
You can open the door to add or remove laundry.
- All programme settings will be saved.
- You can change the drying level, if required.
Open the door.

Add or remove laundry.

Close the door.

Touch the Start/Stop sensor control so that the Delay start period

continues.

Time left

Altering the programme sequence can cause the programme duration
shown in the display to be adjusted.
Interrupt programme
/
sensor control is pressed.
Cancel programme?
function is selected in