Table of Contents
Advertisement
AXIS 282/AXIS 282A - Using the Video Server
16
Notes:
•To view streaming video in Microsoft Internet Explorer, you must set your browser to allow the
AXIS Media Control (AMC) to be installed on your computer. AMC also provides an MPEG-4
decoder for viewing MPEG-4 video streams. This decoder is installed the first time an MPEG-4
video stream is accessed. Please note that the product administrator may have disabled the
installation of the decoder, as a license is required for each instance. See page 35 for more
information.
•If your workstation restricts the use of additional software components, the AXIS 282/AXIS
282A can be configured to use a Java applet for updating JPEG images. Please see the online
help for more information.
The Live View page
If your AXIS 282/AXIS 282A has been customized to meet specific requirements, the
buttons and other items described below may or not be displayed on the Live View page.
The following provides an overview of each available button:
The Output buttons control an output directly from the Live View page. These
buttons are configured under Setup > Live View Config > Layout.
Pulse - click this button to activate the port for a defined period of time, e.g. to
switch on a light for 20 seconds.
Active/Inactive - click these buttons to manually start and stop a connected
device, e.g. switch a light on/off.
These buttons start/stop the Sequence Mode. This mode is created in Setup >
Live View Config > Sequence mode and automatically displays the view
from 2 or more video sources at set intervals.
The Action buttons trigger an event directly from the Live View page. These
buttons are configured under Setup > Live View Config > Layout. Click these
buttons to manually start and stop events.
To resize the displayed image, click the View Size buttons: half-size
(x
), full-size (x1), x2 or x4. This will not change the resolution of the
1
/2
image (not available in Sequence Mode).
The Video Format drop-down list allows the video format on the Live
View page to be temporarily changed.
From the Source list, select the desired video image(s). The list can
contain internal video sources, external video sources, or PTZ presets.
Advertisement
Table of Contents
