AXIS 282/AXIS 282A - Pan Tilt Zoom
42
Pan Tilt Zoom
Installing PTZ Devices
The AXIS 282/AXIS 282A supports several PTZ devices. Please see www.axis.com for a
complete list of supported devices, and to obtain the correct driver. Follow the instructions
below to install a PTZ device:
1. Using an appropriate cable, connect the device to your selected port (RS-232 or
RS-485). This configurable port is available via the 34 I/O pins. See pages 58 and
59 for more information.
2. In the setup tools, go to Setup > System Options > Ports & Devices and then
select the port (RS-232/RS-485) to configure.
3. Select Pan Tilt Zoom from the Usage drop-down list.
4. Click Upload to install a PTZ driver.
(PTZ drivers are available from the Axis Web site at www.axis.com)
5. Click Port Options... to modify the port settings. The default values correspond to
the values specified by the PTZ driver.
6. From System Options > Ports & Devices, select the port configured for PTZ and
then select the video source to use with the device.
7. If required, click the Advanced Options button to make further settings and see
the online help.