Frame Rates - Motion Jpeg; Frame Rates - Mpeg-4 - Axis 282 Integrator And User’s Manual

AXIS 282/AXIS 282A - Technical Specifications
70
Important!
•The figures displayed here are the values as delivered by the server. If other restrictions are
currently in force, (e.g. bandwidth limitation) these values might not correspond to those
actually received by the client.
•For Motion JPEG, these values will only be accurate as long as no frame rate limit has been
specified.

Frame rates - Motion JPEG

The following test results show the frame rates in frames/second (fps) for Motion JPEG
streams from the AXIS 282/AXIS 282A, using a compression level of 50%. Note that these
values are guidelines only - actual values may vary.

Frame rates - MPEG-4

The following test results show the frame rates in frames/second (fps) for MPEG-4 streams
from the AXIS 282/AXIS 282A. Note that these values are guidelines only - actual values
may vary.
The MPEG-4 test conditions:
• Compression level = 50%
• Video Object Type = Advanced Simple
• GOV structure = IP*
*Note that setting the GOV structure to use "I-frames only" will increase the frame rate.
fps (PAL/NTSC)
4CIF
2CIF expanded
2CIF
CIF
QCIF
fps (PAL/NTSC)
4CIF
2CIF expanded
2CIF
CIF
QCIF
1 channel
25/30
25/30
25/30
25/30
25/30
1 channel
17/21
17/21
25/30
25/30
25/30