The Live View Page - Axis 242S IV User Manual

The Live View page

If your AXIS 242S IV has been customized to meet specific requirements, the buttons and
other items described below may or may not be displayed on the Live View page. The
following provides an overview of each available button:
To resize the displayed image, click the View Size buttons: half-size
(x
image (not available in Sequence Mode).
The Video Format drop-down list allows the video format on the Live
View page to be temporarily changed.
The Output buttons control
an output directly from the
Live View page. These
buttons are configured
under Setup > Live View
Config > Layout.
The IV buttons are used to configure and view the status for the currently
running IV module.
These buttons start/stop the Sequence Mode. This mode is created in Setup >
Live View Config > Sequence mode and automatically displays the view
from 2 or more video sources at set intervals.
The trigger buttons trigger an event directly from the Live View page. These
buttons are configured under Setup > Live View Config > Layout. Click these
buttons to manually start and stop events.
Use the Snapshot button to capture a snapshot of the image currently being
displayed in the window. Right-click on the image to save it in on your
computer.
The AMC viewer toolbar (AXIS Media Control) is available in Microsoft Internet
Explorer only and displays the following buttons:
), full-size (x1), x2 or x4. This will not change the resolution of the
1
/2
From the Source list, select the desired video image(s). The list can
contain internal video sources and external video sources.
AXIS 242S IV - Using the video server
Pulse - click this button to activate the port
for a defined period of time, e.g. to switch on
a light for 20 seconds.
Active/Inactive - click these buttons to
manually start and stop a connected device,
e.g. switch a light on/off.
9