Hi Vacum Unit; 2000 Hours Esc; Filter Cleaning; Status Report - Nederman L-PAK Series Manual

5.1.5

Filter Cleaning

The unit is cleaning its filter.
Filter
Cleanining
Cycles 1
Elapsed 0
Clean 00:00 s
Charge 00:00 s
ESC OK
5.1.6

Status report

NEDERMAN

Hi Vacum Unit

L-PAK Standard
OFF
TimeTo Service
2000 Hours
ESC
Status Report 1
Sn:
Starts
FLT M-Prot
FanTempHi
CleanePulse
1. Press the down arrow
2. Press the right arrow
1) Press Escape
screen.
2) Press Escape
Report screen.
Sn Software number– Revision- Language.
Starts The number of motor starts.
FLT M-Prot Number of times motor overload protector has been activated.
FanTempHi Number of times Hi Temp Fan, thermostat has activated fan Cooling.
CleanePulse Number of cleaning pulses by the cleaning valve.
CASAlarm How many times Compressed Air Switch has alerted for low pressure.
5.2

Warning messages

If a warning is activated, there is a problem that needs to be corrected, but the unit
continues to work.
When a warning is activated, Output Q4 and White lamp button "Filter Cleaning/ Test
start" flash with intervals, 1 second On/3 second Off.
If the flush valve function is chosen, it disconnects Output Q4 as a warning/Alarm signal
output. See section 6.5. Warning-Alarm output Q4.
Cycles: How many cleaning pulses will be carried out.
Elapsed: How many cleaning pulses are made.
Clean: Remaining time for cleaning pulse.
Charge: Remaining vacuum build time; the time until cleaning pulse is
activated.
Thu 10:45
2018-02-01
OK
2180523-0-EN
0
0
0
0
ESC OK
once to show the time and date screen.
until the arrow screen appears.
and the up arrow
ESC
and the up arrow
ESC
L-PAK 150/250 Standard
ESC + C
ESC OK
Status Report 2
CASAlarm 1
ESC OK
at the same time to show the Status Report
at the same time to show the next Status
9/9
ESC OK
EN
9