Alarm! Fan Hi Temp; Alarm! Motor Protector Activated; Alarm! Low Pressure Cas - Nederman L-PAK Series Manual

5.3.1

Alarm! Fan Hi Temp

When the fan temperature passes above 125°C, a Warning Fan Hi Temp message is
displayed, and the filter cleaning valve opens to let air in to cool the fan.
If the filter-cleaning valve has been open to cool the fan more than 8 minutes, and the
temperature has not gone below 90°C. The unit shuts off and the message Alarm Fan Hi
Temp is displayed. Correct the problem, and press 'OK'
Alarm!
Fan Hi Temp
Vacuum Unit
Off
Th 11:23
Reset OK 
ESC OK
5.3.2

Alarm! Motor Protector Activated

The motor is overheated. Correct the problem, and press 'OK'
Alarm!
Motor
Protector
Activated
Th 11:23
Reset OK 
ESC OK
5.3.3

Alarm! Low Pressure CAS

This alarm is only shown when the Compressed Air Switch (CAS) is installed.
The compressed air level is low. When the accurate pressure is established, No reset is
required after active alarm message.
Alarm!
Compressed Air
Low Pressure
CAS<3Bar
Th 11:23
ESC OK
Th: The actual day and time when L-Pak was stopped.
Th: The actual day and time when L-Pak was stopped.
Th: The actual day and time when L-PAK was stopped.
L-PAK 150/250 Standard
to reset the warning.
OK
to reset the warning.
OK
EN
11