NEX D/DX Table of Contents Declaration of Conformity ...4 ............................Installation Figures ..................................1 Preface ..........................................2 Hazard Notices ....................................3 Description ......................................Technical data ................................... 4 Installation ........................................ bend in hanging or standing position ..................Mounting ......................................4.2.1 Rotary stop ....................................
NEX D/DX Declaration of Conformity Declaration of Conformity We, AB Ph. Nederman & Co., declare under our sole responsibility that the Nederman product: NEX D/DX (Part No. **, and stated versions of **) to which this declaration relates, is in conformity with all the relevant provisions of...
Contact the nearest authorized distributor or Nederman for advice on technical service and obtaining spare parts. If there are any damaged or missing parts when the product is delivered, notify the carrier and the local Nederman representative immediately.
NEX D/DX Mounting See Figures 5-11. The extraction arm can be mounted on wall or ceiling together with a wall bracket. Ensure that the surface, on which to mount the arm, is level and use the wall bracket to mark the holes. Use anchor bolts and nuts suitable for the wall material.
NEX D/DX Operation WARNING! Ignition risk for some dust or solvents. • Do not collect material that is caustic, explosive, highly flammable, chemically unstable, spontaneously ignitable, or which can release sparks. • Check that no objects that can cause a spark or fire are sucked in to the arm, or impact against the hood.
NEX D/DX Internal cleaning, arm system Internal cleaning is recommended approximately once a year, see Figure 14. Hold the arm straight at a slight angle. Detach hose, arm covers and bellows but not the arm system, see Figure 13. Carry out dry or wet cleaning according to instructions in section 6 - Service and cleaning.
The product has been designed for component materials to be recycled. Its different material types must be handled according to relevant local regulations. Contact the distributor or Nederman if uncertainties arise when scrapping the product at the end of its service life.
Page 20
NEX D/DX The Nederman Group is one of the World’s leading suppliers of products and solutions within the environmental technology sector focusing on industrial air filtration and recycling. These products and solutions reduce the environmental impact of industrial production and create safe and clean working environments while boosting production efficiency.