Resetting To The Factory Default Settings - Axis M1054 User Manual

Server Report - Provides information about the server status and should always be included when requesting support.
•
• Parameter List - Shows the unit's parameters and their current settings.
Connection List - Lists all clients currently accessing video and audio. It is also used for system analysis and
•
troubleshooting.
Configuration
From the drop-down lists, select the level of information to be added to the System Log and Access Log files and the
permitted size of the log files. The default information level for the Access Log is set to Critical & Warnings, i.e. failed
connections. However, in an error situation and when requesting support, set it to the highest information level - Critical &
Warnings & Info.
For the Log Level for Email, select from the drop-down list the level of information to send as email and enter the destination
email address.
Advanced
Scripting - Scripting is an advanced function that enables you to customize and use scripts. This function is a very powerful
tool.
Caution!
Improper use may cause unexpected behavior or even cause loss of contact with the unit. If a script does cause problems,
reset the unit to its factory default settings. A backup file may be of use to return the unit to its latest configuration.
Axis strongly recommends that you do not use this function unless you understand the consequences. Note that Axis
support does not provide assistance for problems with customized scripts.
For more information, please visit the Developer pages at www.axis.com/developer
File Upload - Files can be uploaded (e.g. web pages and images) to be used as custom settings. Set user level access to
control which files can be viewed by different users.
Plain Config - This function is for the advanced user with experience of Axis network camera configuration. All parameters
can be set and modified from this page. Help is available from the standard help pages.
About
Here you can find basic information about your network camera. You can also view third party software licenses.

Resetting to the Factory Default Settings

To reset the camera to the original factory default settings, go to the System Options > Maintenance web page (as described
in Maintenance, on page 41) or use the Control button (see page 6) as described below:
Using the Control Button
To reset the camera to the factory default settings using the Control Button:
1. Disconnect the power cable, or if using PoE, disconnect the network cable.
2. Press and hold the Control button while reconnecting power.
3. Keep the Control button pressed until the Status Indicator color changes to amber (this may take up to 15
seconds).
4. Release the Control button.
5. When the Status Indicator changes to green (which may take up to 1 minute), the process is complete and the
camera has been reset. The unit now has the default IP address 192.168.0.90
AXIS M10 Series - Resetting to the Factory Default Settings
42