Axis M1011 Installation Manual
Sts network camera
Hide thumbs
Also See for M1011:
- Installation manual (92 pages) ,
- User manual (61 pages) ,
- Specifications (2 pages)
Related Manuals for Axis M1011
Summary of Contents for Axis M1011
- Page 1 INSTALLATION GUIDE AXIS M1011 STS Network Camera AXIS M1011-W STS Network Camera AXIS M1031-W STS Network Camera...
- Page 2 This document includes instructions for installing this document, including, but not limited to, the the AXIS M1011/M1031 STS on your network. implied warranties of merchantability and fitness Previous experience of networking will be for a particular purpose.
-
Page 3: Installation Steps
Axis STS Network Camera Installation Guide Page 3 Axis STS Network Camera Installation Guide This installation guide provides instructions for installing your Axis STS Network Camera. The models covered by this guide are: • AXIS M1011 STS • AXIS M1011-W STS •... -
Page 4: Camera Overview
Page 4 Axis STS Network Camera Installation Guide Camera overview Front view AXIS M1031-W STS Front view AXIS M1011/-W STS Lens with Status Indicator LED Lens with Status Indicator Microphone Speaker Light PIR Sensor AXIS M1031-W STS Notes: • The light (an illuminator LED) has a maximum lifespan of 30000 hours. It is not intended for constant operation. -
Page 5: Mount The Camera
Page 5 Mount the camera Camera stand The Axis STS Network Camera is shipped with the stand and extension section mounted. Depending on the required installation, disassemble the stand and follow the instructions for wall or shelf mounting below. Base plate... -
Page 6: Connect The Cables
Page 6 Axis STS Network Camera Installation Guide Connect the cables 1. Connect the camera to your home broadband router, using a shielded network cable - do not connect it directly to your computer. For the wireless models, this connection is temporary and allows the camera’s wireless settings to be configured before connecting to the wireless... - Page 7 - some features might not be available. Notes: •If using Internet Explorer, you may need to approve the automatic installation of AMC (AXIS Media Control), which allows viewing of the video stream. You will need administrator rights on the computer to do this.
- Page 8 Page 8 Axis STS Network Camera Installation Guide Configure the wireless connection For a wireless camera, the wireless settings should be configured while the camera is connected via the network cable. After the settings have been made, the cable can be disconnected. Configuring the camera via an unsecured wireless connection is not recommended, as passphrases and keys will be sent in plain text.
-
Page 9: Wireless Settings
Axis STS Network Camera Installation Guide Page 9 Wireless Settings These settings control how the wireless camera interacts with the wireless network. Apart from identifying the wireless network, it is also possible to enable wireless encryption. SSID - This is the name of the wireless network the camera is configured for. The field accepts up to 32 alphanumeric characters. -
Page 10: Status Led
3 minutes, reconnect the network cable and check that the wireless settings match those in the wireless access point/router. LED indications & troubleshooting Status LED During startup, the Status LED on an Axis STS camera shows the following: 1. Unlit for approximately 10 seconds. 2. Orange for approximately 10 seconds. 3. Unlit. -
Page 11: Network Led
Axis STS Network Camera Installation Guide Page 11 Network LED The Network LED on the camera can indicate the following: • Green flash - Connected to the network at 100 Mbps. • Orange flash - Connected to the network at 10 Mbps. - Page 12 Tested to comply with FCC Standards FOR HOME OR OFFICE USE. This product must be installed and used in strict accordance with the instructions given in the user documentation. This Axis product complies with the following radio frequency and safety standards:...
- Page 13 Europe - EU Declaration of Conformity. Axis Communications AB declares that this terminal (Model name : M1031-W, M1011-W) fulfills the essential requirements according to directive R&TTE 1999/5/EC, with essential test suites as per standards: EN 301 489 General EMC requirements for radio equipment, ETS 300 328 Technical requirements for radio equipment.
- Page 15 Axis STS Network Camera Installation Guide, v1.0 November 2008 Copyright © Axis Communications AB, 2008 Part No. 33116...