Led Indicators - Axis M1054 User Manual

LED indicators

LED Color Indication
Network Green Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Amber Steady for connection to 10 Mbit/s network. Flashes for network activity.
Unlit No network connection.
Status Green Steady green for normal operation.
Note: The Status LED can be configured to be unlit during normal operation, or to
flash only when the camera is accessed. To configure, go to Setup > System
Options > LED. See the online help files for more
Amber Steady during startup, during reset to factory default or when restoring settings.
Red Slow flash for failed upgrade.
Power Green Normal operation.
Amber Flashes green/amber during firmware upgrade.
Wireless Unlit Wired mode.
Green Steady for connection to a wireless network. Flashes for network activity.
Red Steady for no wireless network connection. Flashes when scanning for wireless net-
works.
AXIS M1031-W and AXIS M1054 only
AXIS M1031-W and AXIS M1054 are equipped with the following:
PIR sensor - a passive infrared sensor that measures infrared light from passing objects in its field of view. If configured to do
so, the camera can automatically switch on the light when triggered by the PIR sensor. Sensitivity range up to 5m (16ft).
Light - it is possible to configure so that the white illumination LED is triggered by the PIR sensor. It can also be configured via
the web pages under Setup > Live View Config > Light buttons. Note that the light is designed for temporary use and should
not be permanently lit.
Microphone/speaker for full-duplex audio.
AXIS M10 Series - LED indicators
information.
8