Led Indicators; Resetting To The Factory Default Settings - Axis M3011 Installation Manual

AXIS M3011 Installation Guide

LED indicators

LED Color Description
Network Green Steady for connection to 100 Mbit/s network. Flashes for network activity.
Amber Steady for connection to 10 Mbit/s network. Flashes for network activity.
Unlit No connection.
Status Green Shows steady green for normal operation.
Note: The Status LED can be configured to be unlit during normal operation, or to flash
only when the camera is accessed. See the online help files for more information. Go to
Setup > System Options > LED settings
Amber Steady during startup, reset to factory default or when restoring settings.
Red Slow flash for failed upgrade.
Power Green Normal operation.
Amber Flashes green/amber during firmware upgrade.
Accessing AXIS M3011 Network Camera from the Internet
Once installed, the AXIS M3011 Network Camera is accessible on your local network (LAN). To
access the camera from the Internet, network routers must be configured to allow incoming traffic,
which is usually done on a specific port. Please refer to the documentation for your router regarding
this.
For more information on this and other topics, visit the Axis Support Web at www.axis.com/techsup

Resetting to the Factory Default Settings

This will reset all parameters, including the IP address, to the Factory Default settings:
1. Disconnect power from the camera.
2. Press and hold the Control button and reconnect power.
3. Keep the control button pressed until the Status Indicator displays amber (this may take up to
15 seconds).
4. Release the control button.
5. When the Status Indicator displays green (which can take up to 1 minute) the process is
complete and the camera has been reset.
6. Re-install AXIS M3011 Network Camera using one of the methods described in this document.
More information
It is also possible to reset all parameters, except the IP parameters, to the original factory settings
via the web interface. For more information, please refer to the online help and the user's manual.
The AXIS M3011 Network Camera User's Manual is available from the Axis Web site at
www.axis.com or from the Axis Network Video Product CD.
Page 13