The Live View Page; General Controls - Axis M1054 User Manual

The Live View page

How you customize the Live View page determines which buttons are visible. Not all the buttons described below will show
up unless configured to do so.

General controls

The Stream Profile drop-down list allows you to select a customized or pre-programmed stream
profile on the Live View page. Stream profiles are configured under Video & Audio > Stream Pro-
files, see Stream Profiles, on page 18 for more information.
Light (Active/Inactive) - The built-in light can be controlled directly from the Live View page. The
three options are Pulse, Active/Inactive and a Slider. Select Active/Inactive to display a button for
each action: Activate and Inactivate. The light button is configured under Live View Config > Lay-
out. For more information see Layout, on page 22.
Light (Pulse) - Select Pulse to display one button that activates the port with the defined Activate
and Inactivate actions for the defined period.
Light (Slider) - Use this slider to adjust the brightness of the camera's white LED.
Audio clip - Audio clips can be played when an event occurs or manually from the Live View page.
The Snapshot button saves a snapshot of the video image on display. Right-click on the video image
to save it in JPEG format on your computer. This button is primarily intended for use when the AMC
viewer toolbar is not available.
AXIS Media Control (AMC) toolbar
AMC general controls
The AMC viewer toolbar (AXIS Media Control) is available in Microsoft Internet Explorer only. See AXIS Media Control (AMC),
on page 15 for more information. AMC displays the following buttons:
The Play button connects to the Axis product and starts playing a media stream.
The Stop button stops the video stream being played.
The Snapshot button takes a snapshot of the current image. The location where the image is saved can be specified
using the AXIS Media Control (AMC).
Click the View Full Screen button and the video image will fill the entire screen. Press Esc (Escape) on the computer
keyboard to cancel full screen view.
The Record button is used to record the current video stream. The location where the recording is saved can be spec-
ified using the AXIS Media Control (AMC) toolbar.
AMC audio controls (AXIS M1031-W/AXIS M1054)
AMC audio controls monitor the client computer's speaker output. These controls are only available when audio is enabled.
Click the Speaker Button to switch the sound off and on to your computer's speaker.
If you have set your network camera to half-duplex mode and the half-duplex Listen button appears first in the Live
View page of your Axis network camera, you are only able to receive audio from an external camera microphone. To
be able to send audio, click this button. See note below.
If you have set your network camera to half-duplex mode and the half-duplex Talk button appears in the Live View
page of your Axis network camera if you push to talk, and you are only able to send audio to your Axis network cam-
era. To be able to receive audio, click this button.
AXIS M10 Series - Accessing the Camera
12