Subscribe to Our Youtube Channel
Related Manuals for Teknik Barrister Home 5417772
Summary of Contents for Teknik Barrister Home 5417772
- Page 1 Teknik Your holder for all things awesome. TV Stand Barrister Home | Model 417772 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
- Page 2 Table of Contents Assembly Tools Required Part Identifi cation No. 2 Phillips Screwdriver Tip Shown Actual Size Hardware Identifi cation Assembly Steps 5-21 Hammer Not actual size Français 22-24 Español 25-28 Skip the power trip. Safety 29-30 This time. Warranty WARNING Use of a TV that is too heavy or large is hazardous.
- Page 3 Now you know Part Identifi cation our ABCs. å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts. RIGHT END (1) BOTTOM (1) FRONT LEG (2)
- Page 4 Hardware Identifi cation å Screws are shown actual size. You may receive extra hardware with your unit. TACK GLIDE - 4 FOOT BASE - 1 ADJUSTABLE FOOT - 1 HIDDEN CAM - 18 CAM DOWEL - 12 HIDDEN ANGLE BRACKET - 4 14H HINGE - 4 CAM SCREW - 6 KNOB - 2...
- Page 5 Step 1 Insert a CONNECTOR SCREW (8S) into each å HIDDEN CONNECTOR (9F). Scan this QR code or go to this address: http://qr.sauder.com/?ID=2278 to watch a video on how to assemble your unit. Step 2 Assemble your unit on a carpeted fl oor or on the empty å...
- Page 6 Step 3 Push twelve HIDDEN CAMS (1F) into the ENDS (A and B), å UPRIGHTS (C and D), and BOTTOM (F). Then, insert the Just think. The sooner metal end of a CAM DOWEL (2F) into each HIDDEN CAM. you do this, the sooner you do something else.
- Page 7 Step 4 Push six HIDDEN CAMS (1F) into the ENDS (A and B). å Arrow (6 used) Arrow Arrow Hole The arrow in the HIDDEN CAM must point toward the hole in the edge of the board. Page 7...
- Page 8 Step 5 Turn six CAM SCREWS (8F) into the FRONT LEGS (K). å (6 used) Page 8...
- Page 9 Step 6 Fasten the STOP MOLDING (O2) to the TOP (E2). Tighten å four HIDDEN CONNECTORS. How to use the HIDDEN CONNECTOR To fasten two parts together using the HIDDEN CONNECTORS, insert your screwdriver, at an angle, into the slot in the HIDDEN CONNECTOR. While pushing the screw into the hole of the adjoining part, turn the screwdriver clockwise to tighten.
- Page 10 Step 7 Fasten a FRONT LEG (K) to the RIGHT END (A). Tighten å three HIDDEN CAMS. Fasten a BACK LEG (L) to the RIGHT END (A). Use three å BLACK 2-1/4" FLAT HEAD SCREWS (26S). BLACK 2-1/4" FLAT HEAD SCREW (3 used in this step) Edge with CAM DOWELS...
- Page 11 Step 8 Fasten a FRONT LEG (K) to the LEFT END (B). Tighten å three HIDDEN CAMS. Don't worry. It isn't Rome. This can be built Fasten a BACK LEG (L) to the LEFT END (B). Use three å in a day. BLACK 2-1/4"...
- Page 12 Step 9 Fasten the LEFT END (B) to the TOP (E2). Tighten two å HIDDEN CAMS. f a c S u r w i t h D E N H I D Caution Start Tighten Risk of damage or Arrow injury.
- Page 13 Step 10 Fasten the UPRIGHTS (C and D) to the TOP (E2). Tighten å four HIDDEN CAMS. Maximum Arrow 210 degrees Minimum 190 degrees Finished edge i t h o f a c S u r D E N H I D i t h f a c S u r...
- Page 14 Step 11 Fasten the BOTTOM (F) to the LEFT END (B). Tighten two å HIDDEN CAMS. Maximum Arrow 210 degrees Fasten the BOTTOM (F) to the UPRIGHTS (C and D). Use å four BLACK 1-7/8" FLAT HEAD SCREWS (2S). Minimum Slide the BOTTOM MOLDING* (N) onto the notched edge å...
- Page 15 Step Step 12 Fasten the RIGHT END (A) to the TOP (E2) and BOTTOM (F). å Tighten four HIDDEN CAMS. Maximum Arrow 210 degrees Fasten four ANGLE BRACKETS (27G) to the TOP (E2). Use å four BLACK 9/16" LARGE HEAD SCREWS (1S). Minimum Fasten the TOP MOLDING (M) to the TOP (E2).
- Page 16 Step Step 13 Fasten the FOOT BASE (24E) to the BOTTOM (F). Use four å SILVER 5/8" FLAT HEAD SCREWS (23S). If you're doing this to help a friend, don't Push the ADJUSTABLE FOOT (25E) into the FOOT BASE (24E). å...
- Page 17 Step Step 14 Carefully turn your unit over onto its front edges. Unfold the å BACK (G) and lay it over your unit. Make the bottom edge of the BACK (G) even with the bottom å edge of the BOTTOM (F). Then, make equal margins along the NAIL side edges of the BACK (G).
- Page 18 Step Step 15 Fasten two HINGES (14H) to each DOOR (H). Use eight å BLACK 1/2" FLAT HEAD SCREWS (11S). BLACK 1/2" FLAT HEAD SCREW (8 used in this step) Page 18...
- Page 19 Step Step 16 Carefully stand your unit upright. å Position your unit in its fi nal location. Turn the ADJUSTABLE FOOT (25E) å Pro Tip: Lift with your downward until it touches the fl oor. legs. And, you know, your arms. IMPORTANT: The ADJUSTABLE FOOT should not extend beyond the å...
- Page 20 Step Step 17 Refer to the enlarged diagram to identify the parts on å the HINGES. The DOORS may need some adjustments. Follow the text å below to make needed adjustments. DOOR ADJUSTMENTS: å To adjust the DOORS from side to side (horizontal), turn the adjusting screw in or out.
- Page 21 Step Step 18 Push the RUBBER SLEEVES (2R) over the METAL PINS (1R). Insert the METAL PINS into the hole locations of your choice å in the ENDS (A and B) and UPRIGHTS (C and D). Set the ADJUSTABLE SHELVES (I and J) onto the METAL PINS. Apply the WARNING LABEL (2L) to the TOP (E2).
- Page 22 WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following safety information. Death or serious injury may occur when children climb on audio and/or video equipment furniture. A remote control or toys placed on the furnishing may encourage a child to climb on the furnishing and as a result may tip over onto the child.
Need help?
Do you have a question about the Barrister Home 5417772 and is the answer not in the manual?
Questions and answers