Toshiba RAS-B10J2FVG-E Service Manual page 66

10. PRESET OPERATION
Set your preferred operation for future use. The setting will be memorized by the
unit for future operation (except air flow direction).
1. Select your preferred operation.
2. Press and ho ld
displays.
3. Press
11. QUIET OPERATION
To operate at ultra low fan speed for quiet operation (except in DRY mode)
Press [ ] Button : Start and stop the operation.
Note: Under certain conditions, QUIET operation may not provide adequate
cooling or heating due to low sound features.
12. POWER-SELECTION OPERATION / SILENT OPERATION
Press button to select Power-SEL, Silent 1 and Silent 2
POWER-SELECTION AND SILENT OPERATION
Note1 : When the level is selected, POWER-SEL level flashes on remote LCD display for 3 seconds
In case of 75% and 50% level, number "75" or "50" also flashes for 2 seconds.
Note2 : Due to the reason that POWER SELECTION FUNCTION and silent operation,
inadequate cooling or heating capacity may occur.
13. COMFORT SLEEP OPERATION
To save energy while sleeping, automatically control air flow and automatically turn OFF.
Press : Select 1, 3, 5 or 9 hrs for OFF timer operation.
Note: The cooling operation, the set temperature will increase automatically
1 degree/hour for 2 hours (maximum 2 degrees increase). For heating operation,
the set temperature will decrease.
14. FLOOR WARMING OPERATION
Heating will operate with downward blowing only. Temperature of air outlet will be higher than usual.
Press : Start and stop the operation.
Note: FLOOR operation can active in Heat mode only.
for 3 seconds to memorize the setting. The
: Operate the preset operation.
[100%]
SILENT#2
[75%] [50%]
SILENT#1
- 66 -
mark
P