Toshiba RAS-B10J2FVG-E Service Manual page 64

2. AUTOMATIC OPERATION
To automatically select cooling, heating, or fan only operation.
1. Press Press : Select Auto A.
: Select the desired temperature : Min 17°C, Max 30°C
2. Press Press
3. Press Press : Select AUTO, LOW , LOW+
Note : QUIET is ultra low fan speed for quiet operation.
3. 8°C OPERATION
1. 1. 1. P P ress button to change Fireplace1, Fireplace2 and 8°C operation
2. 2. Pre Press to adjust setting temperature from 5°C to 13°C
Note1 : 8°C will operate in Heating mode only. If Air conditioner performs in cooling
operation (including automatic cooling) or dry operation it will change to
heating operation.
Note2 : With Fireplace operation on heating mode indoor unit always runs
and cold air breezing might be occurred.
4. COOLING / HEATING / FAN ONLY OPERATION
1. Press Press : Select Cool
2. Press Press : Set the desired temperature : Min 17°C, Max 30°C
Fan Only : No temperature indication
3. Press : Select AUTO, LOW , LOW+
5. DRY OPERATION (COOLING ONLY)
For dehumidification, a moderate cooling performance is controlled automatically.
1. 1. . Pre Press : Select Dry
2. Pre ss : Set the desired temperature.
Note: DRY mode fan speed is set to Auto only.
6. Hi-POWER OPERATION
To automatically control room temperature and airflow for faster cooling or heating operation (except
in DRY and FAN ONLY mode)
Press Press : Start and stop the operation
7. ECO OPERATION
To automatically control room temperature to save energy (except in DRY and FAN ONLY mode)
Press : Start and stop the operation.
Note: Cooling operation; the set temperature will increase automatically 1 degree/
hour for 2 hours (maximum 2 degrees increase). For heating operation the
set temperature will decrease.
FIREPLACE and 8°C operation.
Fireplace#1 Fireplace#2
Normal
operation
, Heat , or Fan only
, MED , MED+ , HIGH
8°C
, MED , MED+
- 64 -
or Quiet
HIGH or Quiet