FINAL INSTALLATION INSTRUCTIONS
4. Insert blade (D) through slot on fan motor assembly
(B), align with four screws holes, securely tighten
with blade screws (AA). Repeat for remaining blades.
Hardware Used
Blade Screw
AA
5. Remove one of the mounting screws (J) on the
mounting plate of motor assembly (B) and keep for
later use. And loosen the other two.
6
.
Insert the 9 pin connector from the motor assembly (B)
through the center hole in the switch housing (C).
Attach the switch housing (C) to the mounting plate on
the motor assembly (B) by placing the keyhole slots
from the switch housing (C) onto the two protruding
mounting screws (J ) heads. Adjust the switch housing
(C) until the screw heads are aligned with the keyholes,
then re-insert mounting screw (J) previously removed
on step 5. Tighten all mounting screws (J) securely.
4
x 12
5
Mounting
Plate
6
Mounting Plate
10
AA
D
J
J
B
B
B
C