Steelcase Elective Elements Adjustable-Height Underworksurface Storage Manual page 2

1.
Unlock (1a) and remove drawers
from cabinet (1b).
2.
Remove finished top by removing
(4) screws through sub-top and (2)
screws from each corner bracket,
then lift top out.
3.
Loosen screws on straps.
4.
Raise adjustable-height brackets to
desired height, then retighten screws.
5.
Remove protective tape from
decorative covers at top of
adjustable-height brackets.
ADJUSTABLE-HEIGHT BRACKETS
2
4
To remove drawers
push lever down on one
side, and up on the other.
2
CORNER SUPPORT BRACKETS
3
1b
1a
STRAP
Page 2 of 3
939500228 Rev F