Air Pressure - BOS Suspension KIRK User Manual

3.1

AIR PRESSURE

In order to get the best performance from your BOS product, it's essential to set up the shock to an
optimum air pressure based on your weight and your bike's rear suspension geometry before using the
shock. Refer to the compatibility table in the download area of BOS website for the base recommended air
pressure.
Connect a shock pump to the Schrader valve located on the side of the upper part of the body, and inflate
to the recommended pressure.
3.2 EQUALIZING AIR CHAMBERS
In order for your shock to function correctly, you must
equalize the air chambers after setting your pressure.
To equalize the chambers, the shock must be fitted on the
bike.
Place the travel checker O-ring at 11 mm from the shock
seal, sit on your bike, and slowly compress the suspension
until the seal comes to the O-ring. Let the suspension slowly
extend to its full travel. Slowly cycle the shock 15 times over
the first 11mm of its travel to complete the equalization
process.
Air Valve
It's recommended to us our BOS high
pressure pump with a digital gauge
for more accuracy, available on our
website:
http://boutique.bosmtb.com/
3. Settings