Advertisement
3.1
AIR PRESSURE
In order to get the best performance from your BOS product, it's essential to set up the shock to an
optimum air pressure based on your weight and your bike's rear suspension geometry before using the
shock. Refer to the compatibility table in the download area of BOS website for the base recommended air
pressure.
Connect a shock pump to the Schrader valve located on the side of the upper part of the body, and inflate
to the recommended pressure.
3.2
EQUALIZING AIR CHAMBERS
In order for your shock to function correctly, you must equalize the air chambers after setting your
pressure.
To equalize the chambers, the shock must be
fitted on the bike.
Place the travel checker O-ring at 11 mm from
the shock seal, sit on your bike, and slowly
compress the suspension until the seal comes
to the O-ring. Let the suspension slowly extend
to its full travel. Slowly cycle the shock 15 times
over the first 11mm of its travel to complete
the equalization process.
It's recommended to us our BOS
shock pump with a digital gauge for
more accuracy, available on our
website:
valve
http://boutique.bosmtb.com/
d'air
3. Settings
11mm
Advertisement
