Table of Contents
Advertisement
Figure 2-5
Enterasys Wireless Outdoor AP Wall Mounting
2.
Secure the Enterasys Wireless Outdoor AP to the wall with three screws (Position B
Figure
2‐5). The screws are not supplied with the device. The type and length of the screws
depend on the type of wall.
Option: Threaded Holes on Rear of Housing
When a wall is extremely thin, it is often not possible to use wall plugs for the screws. To allow
wall mounting in this situation, four M4 threaded holes are provided on the rear of the Enterasys
Wireless Outdoor AP. The drilling template is a square with sides 100 mm long. The device can
therefore be mounted on a wall with bolts through the wall.
Mounting Without an Adapter (Wall Mounting Only)
Enterasys Wireless Outdoor AP Installation Guide 2-5
Advertisement
Table of Contents
