Table of Contents
Advertisement
Mounting the Enterasys Wireless Outdoor AP with Mounting Plate
Fitting the Mounting Plate to an S7 Standard Rail
To fit the mounting plate to an S7 standard rail:
1.
Place the mounting plate with the two protruding catches on the top edge of the S7 standard
rail (Position A in Figure
Figure 2-9
2.
At the bottom, the mounting plate has two lugs with holes. Screw the lugs to the S7 standard
rail (position B in Figure
Fitting the Mounting Plate to a DIN Rail
To fit the mounting plate to a DIN rail:
1.
Place the mounting plate with the two catches (Position A in Figure
the DIN rail.
2-8 Mounting the Enterasys Wireless Outdoor APs
2‐9).
Side View of a Mounting Plate on an S7 Standard Rail
2‐9). The required screws are supplied with the mounting plate.
2‐10) on the upper edge of
Advertisement
Table of Contents
