Advertisement
TS 710
Smoke
™
- Leg Installation
Table Desk with Legs
(Caster shown, glide legs assembled in same manner)
Note: For those legs with casters, the two (2) locking
casters should be oriented at the front side of the
worksurface.
©
2001 Steelcase Inc.
Grand Rapids, MI 49501 U.S.A.
Printed in U.S.A.
Table Desk with Legs
1.
Unpack the parts and lay them
out on a carpeted surface to avoid
scratches. Make sure you have all
the items shown.
Wood screws (32)
Caster Stems (4)
Top
2.
Lay the worksurface upside
down with the leg mounting
holes facing up.
Legs (4)
Casters (4)
R
Page 1 of 2
TS710 Rev C
Advertisement
Table of Contents
Related Manuals for Steelcase Turnstone Smoke TS 710
Summary of Contents for Steelcase Turnstone Smoke TS 710
- Page 1 Note: For those legs with casters, the two (2) locking casters should be oriented at the front side of the worksurface. © 2001 Steelcase Inc. Grand Rapids, MI 49501 U.S.A. Page 1 of 2 TS710 Rev C Printed in U.S.A.
- Page 2 Table Desk with Legs (continued) Thread caster stems into legs Attach legs to the worksurface. Align the holes with (best method is to use socket the pilot holes on the top. Place (8) screws into holes with portable drive). and drive them tightly. NOTE: Position legs with the angle of the legs facing outwards toward the corner.
Need help?
Do you have a question about the Turnstone Smoke TS 710 and is the answer not in the manual?
Questions and answers