Inspect - AT&T Merlin Legend MLX-20L Operation Manual

Inspect

Use Inspect when you are on a call and you want to see who
is on hold on other call buttons. When you press the Inspct
button and a call button, lines 1 and 2 of your display show
detailed information about the call button you pressed, and
lines 5 through 7 show abbreviated information for all call
buttons.
Inside call information includes the caller's extension (and the
caller's name if it's programmed in your system). Outside call
information includes OUTSIDE (or the name assigned to the
trunk, if it's been programmed) and the trunk number.
If your company subscribes to AT&T's INFO2 automatic
number identification (ANI) service, you see the outside phone
number of the person calling you.
Note: The availability of the caller identification information
may be limited by local-serving (caller's) jurisdiction,
availability, or central office equipment.
If you inspect a call button for a conference, your display
shows who is connected on the conference. An asterisk
appears next to the last person added to the conference. This
person will be dropped from the conference if you press the
Drop button, then the call button.
4-24