AT&T Merlin Legend MLX-20L Operation Manual page 57

To Direct Announced Calls with or without a DSS
1. Press Start .
The caller is put on hold and you hear a dial tone. The Source button
shows fast flashing green light.
2. Dial extension or outside number.
You may need to enter the dial-out code or pool access code before
dialing the outside number.
3. Stay on the line until person answers and announce the call.
• Press Source to return to the original caller, if necessary.
The called person is put on hold, and the Destination button shows
a fast flashing green light.
• Press Destination to return to the called person, if necessary.
The original caller returns to hold, and the Source button shows fast
flashing green.
• Press Cancel to cancel the call to the co-worker or outside
number and return to the original caller (Source).
• Press Join to speak with the caller and the person being
called in a 3-way conference.
4. Remove yourself from the call.
• Press Release , hang up, or use the headset to complete the
call direction or to leave 3-way conference without
disconnecting the other two participants. See Notes.
• Press Forced Release to disconnect everyone.
• Press Hold to put a 4- or 5-way conference on hold so that you
are free to handle other calls.
2-13