1. Setting Up and Operating the HST-X04 Scanner
The HST-X04 scanner is a versatile pipe and plate scanner, which can be used to
inspect welds using TOFD or pulse-echo techniques.
1.1
Description
The HST-X04 scanner is composed of two probe holders mounted on a bar. A mini-
encoder is installed on one of the probe holders (see Figure 1-1 on page 11).
Note: Instrument model and connector type can vary.
Note: Instrument model and connector type can vary.
Bar
Probe holders
Figure 1-1 The HST-X04 scanner
Setting Up and Operating the HST-X04 Scanner
DMTA020-01EN, Rev. C, March 2014
Mini-Wheel
encoder
11